English
Company News
What EU Buyers Actually WantBuyers of machinery products in EU countries (especially professional importers, distributors, and end-users) are by no means looking for a simple CE certificate.
In fact, there is no such thing as an official CE certificate in EU law. The CE marking is a self-declaration by the manufacturer (Declaration of Conformity, DoC) that the product complies with relevant EU directives (such as the Machinery Directive 2006/42/EC, or the new Machinery Regulation EU 2023/1230, which will soon be fully mandatory).
What buyers truly need is a complete set of documents that can legally prove compliance, technically demonstrate safety, and provide exoneration in case of disputes. If only a certificate issued by a third-party body is provided
Updated on 03.08
EN ISO 13857: Does the guarding on the equipment meet the requirements?EN ISO 13857 is an extremely important B1 type general standard in the field of mechanical safety. Its core purpose is to prevent upper and lower limbs of personnel from reaching hazardous areas of machinery by specifying safety distances.
1. Scope and Basic Principles
Applicability: Applicable to all types of machinery (industrial and non-industrial environments).
Core Concept: Safety protection is achieved through distance. If the hazardous area cannot be completely enclosed, sufficient distance must be maintained so that limbs cannot reach the danger point even when extended to their limit.
2. Safety Distance Requirements for Upper Limbs
The standard divides upper limb protection into three main scenarios based on how limbs approach the hazardous area and provides detailed table data:
A. Reaching through openings ("
Updated on 03.28
EN 60204-1: What issues do we need to pay attention to?EN 60204-1 (Full name: Safety of machinery - Electrical equipment of machines - Part 1: General requirements) is the core standard for electrical safety design of mechanical products.
1. Disconnecting Devices and Switching Off Power
This is the first line of defense for electrical safety, and the standard has very detailed regulations on how to switch off power:
Main Disconnecting Device (Main Dis
Updated on 03.07
EN ISO 14122The EN ISO 14122 series of standards (full name: Safety of machinery - Permanent means of access to machinery) is a core safety standard that is universally applied in Europe and internationally. It specifies requirements for the design, manufacture, and installation of permanent means of access to industrial machinery. The standard aims to prevent falls, slips, or other accidents when people are using access facilities such as platforms, stairs, and ladders.
The standard is divided into four parts, each addressing specific requirements for different types of access facilities:
Part 1: Choice of fixed means of access and general requirements (EN ISO 14122-
Updated on 03.21
EN 60204-1 Electrical Cabinet Heat Dissipation Requirements CalculationCabinet cooling calculation is **crucial** in the fields of industrial control, power systems, and automation. Its main functions are reflected in the following aspects:
1. Ensuring reliable operation and extending the lifespan of equipment:
* Electrical components (such as PLCs, inverters, drives, contactors, power supplies, etc.) generate heat during operation.
* Excessive temperatures accelerate component aging, leading to reduced insulation performance, parameter drift in electronic components, and fatigue in metal parts.
* The core purpose of cooling calculation is to control the cabinet temperature below the maximum allowable operating temperature of the components (usually well below this value, leaving a safety margin), thereby ensuring long-term stable and reliable equipment operation, avoiding unexpected shutdowns or performance degradation due to overheating, and significantly extending the equipment's service life.
2. Prevention of
Updated on 03.01
EN ISO 13849-1 PL CalculationI. Core Objective of PL Calculation
Quantitatively assess the reliability of the control system to ensure the achieved PL value (PL) meets or exceeds the target PL value (PLr). PL is divided into 5 levels: from the lowest PLa to the highest PLe.
II. Six-Step Process for PL Calculation
1. Define Safety Function Requirements
- Clarify the behavioral logic of the safety function, e.g., "Immediately stop machine movement when the safety gate is opened."
- Requires detailed description of the correlation between inputs (sensors), logic processing (PLC/safety relay), and outputs (actuators).
2. Determine Required Performance Level (PLr)
- Determine PLr through **risk assessment**, based on three parameters:
S (Severity of harm), F (Frequency of exposure), and P (Probability of avoidance) according to
Updated on 02.27
ISO 12100 Risk Assessment
The CE Machinery Directive (2006/42/EC) requires manufacturers to ensure machine safety through systematic risk assessment, which is a core part of obtaining CE certification. A well-presented risk assessment can instill a great sense of trust in customers.
I. Basic Principles of Risk Assessment
1. Objectives and Responsibilities
- Primary Objective: To identify all potential hazards throughout the machine's lifecycle (design, manufacturing, installation, use, maintenance, disposal) and reduce risks to an acceptable level through protective measures.
- Legal Entity: The manufacturer bears the responsibility for the assessment independently. Even if a third-party organization is commissioned, the ultimate responsibility still rests with the manufacturer.
2. Core Principles
- Adherence to ISO 12100 Standard: This standard is an EU harmonized standard that provides a framework for risk analysis.
Updated on 02.22